考虑质心流动与偏移的通用弹道仿真模型

引入了质心坐标系的概念,对弹体坐标系的定义作了适当修正,给出了考虑质心流动与偏移的通用弹道仿真模型及相应的转动惯量与惯性积的计算公式     

战车火控系统软件可靠性的仿真测试平台

以平均无故障时间间隔(MTBF)和任务成功率为主指标,以某型坦克火控系统为载体,提出了战车非制导武器火控系统软件可靠性仿真测试平台的方案,并对其软件可靠性的仿真测试与验证技术进行了讨论.     

光学仪器快速干燥仪的研制

本文从通用性出发利用现代制冷除湿和吸附除湿技术,设计了多功能部件,成功地研制了光学仪器快速干燥仪。通过校核计算及实际应用,完全满足了光学仪害性能的使用要求。     

碳化硼涂覆的碳纤维的抗热氧化性研究

用自己合成的裂解能得到碳化硼的聚碳硼烷,对碳纤维进行涂层,并详细测试了涂层碳纤维的抗热氧化性能。     

磁致伸缩扭转导波小管径弯管检测

针对扭转导波对小管径弯管的检测问题,分别采用数值模拟和实验方法进行研究。使用ANSYS软件模拟扭转导波在弯管中的传播;设计一种针对小管径管道的磁致伸缩扭转导波检测传感器,并对弯管进行检测,建立该传感器的导波激发和接收模型,利用理论模型对实验信号进行解读。研究结果表明:T(0,1)模态导波在小管径管道弯头处发生模态转换,部分T(0,1)模态转换成F(1,1)模态,F(1,1)模态具有方向性,垂直于弯头拱背-拱腹方向;模态转换会造成检测信号的双端面反射现象,第二个端面回波与第一个端面回波幅值比随频率的增大呈减小趋势;传感器激发出的纵向磁致伸缩力会导致实验信号中出现少量纵向模态导波。研究结论为磁致伸缩扭转导波对小管径弯管的检测提供理论指导。     

Modeling and solution for the ship stowage planning problem of coils in the steel industry

We consider a ship stowage planning problem where steel coils with known destination ports are to be loaded onto a ship. The coils are to be stowed on the ship in rows. Due to their heavy weight and cylindrical shape, coils can be stowed in at most two levels. Different from stowage problems in previous studies, in this problem there are no fixed positions on the ship for the coils due to their different sizes. At a destination port, if a coil to be unloaded is not at a top position, those blocking it need to be shuffled. In addition, the stability of ship has to be maintained after unloading at each destination port. The objective for the stowage planning problem is to minimize a combination of ship instability throughout the entire voyage, the shuffles needed for unloading at the destination ports, and the dispersion of coils to be unloaded at the same destination port. We formulate the problem as a novel mixed integer linear programming model. Several valid inequalities are derived to help reducing solution time. A tabu search (TS) algorithm is developed for the problem with the initial solution generated using a construction heuristic. To evaluate the proposed TS algorithm, numerical experiments are carried out on problem instances of three different scales by comparing it with a model‐based decomposition heuristic, the classic TS algorithm, the particle swarm optimization algorithm, and the manual method used in practice. The results show that for small problems, the proposed algorithm can generate optimal solutions. For medium and large practical problems, the proposed algorithm outperforms other methods. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 564–581, 2015     

Bicriteria scheduling on a single batching machine with job transportation and deterioration considerations

We study a single batching machine scheduling problem with transportation and deterioration considerations arising from steel production. A set of jobs are transported, one at a time, by a vehicle from a holding area to the single batching machine. The machine can process several jobs simultaneously as a batch. The processing time of a job will increase if the duration from the time leaving the holding area to the start of its processing exceeds a given threshold. The time needed to process a batch is the longest of the job processing times in the batch. The problem is to determine the job sequence for transportation and the job batching for processing so as to minimize the makespan and the number of batches. We study four variations (P1, P2, P3, P4) of the problem with different treatments of the two criteria. We prove that all the four variations are strongly NP‐hard and further develop polynomial time algorithms for their special cases. For each of the first three variations, we propose a heuristic algorithm and analyze its worst‐case performance. For P4, which is to find the Pareto frontier, we provide a heuristic algorithm and an exact algorithm based on branch and bound. Computational experiments show that all the heuristic algorithms perform well on randomly generated problem instances, and the exact algorithm for P4 can obtain Pareto optimal schedules for small‐scale instances. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 269–285, 2014     

反舰导弹攻防对抗仿真系统研究

针对信息化海战下导弹攻防对抗仿真的迫切需求,面向作战使用人员(作战视图)、科研院所对抗技术研究人员(技术视图)和装备研制机构及相关技术人员(装备视图),采用数字仿真技术与注入式仿真技术相结合的方式,构建一个以导弹攻防体系对抗装备(或技术手段)的功能数学仿真模型为核心,以直接信号注入技术为仿真验证手段的反舰导弹攻防对抗仿真系统,为反舰导弹的作战使用和电子对抗战术运用提供了一个开放式的研究与训练平台.     

自由飘浮空间机器人准刚性分解运动轨迹控制与仿真

研究轨道空间机器人操作时,基座处于自由飘浮状态的手爪准刚性运动直角坐标轨迹的分解运动控制,重点分析了广义雅可比矩阵的计算,并进行了空间单手３—ＤＯＦ的仿真,该方法可相应推广到开链多手。